On-Site Coatings

XTREME POLYUREA XT 3500 Pure Polyurea-INDUSTRIAL

XTREME POLYUREA XT3500 – Pure Polyurea

Pure Polyurea XTREME POLYUREA XT3500 is a fast set, rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces. It’s extremely fast gel time makes it suitable for applications down to -20oF. It maybe applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures.

FEATURES

Excellent Thermal Stability
No Toxic Vapours
Meets USDA Criteria & Australian Standards
Seamless
Low Temperature Flexibility
Good Chemical Resistance
Coats most Metals without Primer
Installed with or without Reinforcement in Transitional Areas
Zero VOC
Odourless
100% Solids
Low Permeance Rate
Non-Reactive

COLOURS
XTREME POLYUREA XT3500 can be tinted to various colours.

TYPICAL USES

Airports and Refineries
Fertiliser Plants
Mining Operations
Food Processing Plants
Marine Environments
Secondary Containment
Walkways and Balconies
Water and Waste Water Treatment
Industrial and Manufacturing Facilities
Power Plants, Structural Steel, Warehouse Floors
Cold Storage Facilities
Landfill Containment
Paper and Pulp Mills, Parking Garage Floors

COVERAGE XTREME POLYUREA XT3500 may be applied at any rate to achieve desired thickness. Theoretical coverage is approximately 1 Litre = 1 Sqm @ 1mm thick.

XTREME POLYUREA Technical Data Sheet XT 3500-INDUSTRIAL

XTREME POLYUREA XT3500 Pure Polyurea

SPRAYABLE ELASTOMER SYSTEM DESCRIPTION AND USES:

Pure Polyurea XTREME POLYUREA XT3500 is a two component spray-in-place flexible 100% solids elastomer polyurea system. It is designed for processing through plural component high-pressure impingement-mix polyurethane dispensing equipment. XTREME POLYUREA XT3500 is a fast cure, textured surface, multi-purpose material, designed for commercial and industrial applications not requiring rated materials. It exhibits adhesion to most materials and is suitable as a protective-abrasive-impact coating for cementatious, metal and/or wood surfaces. XTREME POLYUREA XT3500 exhibits excellent high temperature properties up to 350F (176C).